Manual - Code 39

Introduction

Code 39 contains all the capital letters, the numbers from 0 to 9, the following special characters "-.$/+%" and spaces.
It exists in an extended version which allows you to write all the ASCII characters from 0 to 127. To do this, the special characters "$/+%" are used. If you wish to use these special characters, check with your reader. If it is not configured in Code 39 Extended mode, it will not work properly.
If you want to use the extended characters, you have to use the BCGcode39extended.

This class inherits the BCGBarcode1D class.

Example

Methods

BCGcode39's Methods

BCGBarcode1D's Methods

BCGBarcode's Methods

Code Example


<?php
use BarcodeBakery\Common\BCGFontFile;
use BarcodeBakery\Common\BCGColor;
use BarcodeBakery\Common\BCGDrawing;
use BarcodeBakery\Barcode\BCGcode39;

$font = new BCGFontFile(__DIR__ . '/font/Arial.ttf', 18);
$colorBlack = new BCGColor(0, 0, 0);
$colorWhite = new BCGColor(255, 255, 255);

// Barcode Part
$code = new BCGcode39();
$code->setScale(2);
$code->setThickness(30);
$code->setForegroundColor($colorBlack);
$code->setBackgroundColor($colorWhite);
$code->setFont($font);
$code->setChecksum(false);
$code->parse('A123');

// Drawing Part
$drawing = new BCGDrawing($code, $colorWhite);

header('Content-Type: image/png');

$drawing->finish(BCGDrawing::IMG_FORMAT_PNG);
?>

Method explanations

  • setChecksum($checksum) — Specifies if a checksum must be added
    Description
    Specifies if a checksum must be added.
  • getThickness() — Returns the thickness of the barcode
    Description
    The thickness of the barcode in pixels. The value isn't multiplied by the scale.
    Returns
    int - value in pixels
  • setThickness($thickness) — Specifies the thickness of the barcode
    Description
    The thickness of the barcode in pixels. This is the vertical size.
  • getLabel() — Gets the label
    Description
    Returns the real value that will be displayed with the barcode. You have to have called the parse() method first.
    Returns
    string - final label
  • setLabel($label) — Sets the label
    Description
    The text label will be written below or above the barcode depending on the barcode. You can write the special value BCGBarcode1D::AUTO_LABEL if you would like your text to be chosen automatically. It will be the value passed to the parse() method.
  • getFont() — Gets the text font for the label
    Description
    Gets the text font for the label.
    Returns
  • setFont($font) — Sets the text font for the label
    Description
    The value of the argument can be either an instance of the BCGFontFile class, BCGFontPhp, or a number between 1 and 5.
    If you are using numbers 1 through 5, PHP fonts are used. Check the PHP Manual.
  • getChecksum() — Gets the checksum appended to the barcode
    Description
    Returns the value that will be appended to the barcode. This method must be called after the method parse().
    Returns
    int - checksum added or false if no checkum is included
  • setDisplayChecksum($display) — Specifies the checksum to be added to the label
    Description
    Setting true will append the checksum to the default label.
    The default value is true.
  • parse($text) — Analyzes a $text message to draw afterwards
    Description
    The data you pass to the $text argument must be supported by the type of barcode you use.
    Check each barcode's introduction section to obtain more information on how to use this method within each symbology.
  • draw($image) — Draws the barcode on the $image
    Description
    The value of the $image argument must be an image resource. The size of the image can be defined by the value received from getDimension().
  • getDimension($width, $height) — Returns an array containing the required size for the image
    Description
    Returns an array in which the first index is the image width and the second index is the image height.
    The arguments are used to specify the starting point of the drawing. Should be 0 for both.
    The BCGDrawing class uses this method to create the image resource.
    Returns
    array(int, int) - [0] is the width, [1] is the height
  • getScale() — Gets the scale of the barcode
    Description
    Gets the scale of the barcode. The value is the number of the "smallest" unit in pixel.
    Returns
    int - value in pixels
  • setScale($scale) — Sets the scale of the barcode
    Description
    The barcode will be $x times bigger. Then a pixel will be $x by $x for its size.
  • getForegroundColor() — Gets the color of the bars
    Description
    Gets the color of the bars of the barcode.
    Returns
  • setForegroundColor($color) — Sets the color of the bars
    Description
    Sets the color of the bars of the barcode. By default, the color is black. This argument can be a BCGColor class or any other argument that BCGColor can accept in its constructor.
  • getBackgroundColor() — Gets the color of the spaces
    Description
    Gets the color of the spaces of the barcode.
    Returns
  • setBackgroundColor($color) — Sets the color of the spaces
    Description
    Sets the color of the spaces of the barcode. By default, the color is white. This argument can be a BCGColor class or any other argument that BCGColor can accept in its constructor.
  • setColor($foregroundColor, $backgroundColor) — Sets the color of the bars and spaces
    Description
    An easy and fast method to set the color of the bars and spaces. Check the setForegroundColor() and setBackgroundColor().
  • getOffsetX() — Gets the X offset
    Description
    Gets the X offset of the barcode in pixels. The value isn't multiplied by the scale.
    Returns
    int - value in pixels
  • setOffsetX($value) — Sets the X offset
    Description
    Specifies the X offset of the barcode in pixels multiplied by the scale. The required size returned by getDimension() will be modified accordingly.
  • getOffsetY() — Gets the Y offset
    Description
    Gets the Y offset of the barcode in pixels. The value isn't multiplied by the scale.
    Returns
    int - value in pixels
  • setOffsetY($value) — Sets the Y offset
    Description
    Specifies the Y offset of the barcode in pixels multiplied by the scale. The required size returned by getDimension() will be modified accordingly.
  • addLabel($label) — Adds a label to the graphic
    Description
    Adds a BCGLabel object to the drawing.
  • removeLabel($label) — Removes a label from the graphic
    Description
    Removes a specific BCGLabel object from the drawing.
  • clearLabels() — Removes the labels from the graphic
    Description
    Clears the BCGLabel objects from the drawing.